Skip to main content

Using the End of Stack Detection Marker

An optional method for improving end of stack detection for CardBots

Written by Travis Kesterson

Updating the Cardbot to Core 6.10.0 (or higher), you will see a setting on the Global tab of the advanced configuration page called use_empty_maker.


Once that is enabled, the marker will need to be printed. The attached file is designed to be printed on a thermal shipping label printer and cut out at the dotted line. When applied to pick up platform on the machine it should look as pictured below.


This should allow the bot to better recognize when the stack is empty and end the scan correctly.

Did this answer your question?